Product Information
Innovative craftsmanship designed with 100% maple shells and Yamahas exclusive Air Seal system. Road worthy for the gigging pro. Shell set only. Cymbals and hardware not included! Shell sizes: 22'' 16'' 14'' 12'' 10''

Gear 4 Music Special Offer
Air Seal System All Yamaha wood drums have one thing in common-Yamahas craftsmen create every drum shell using their exclusive staggered diagonal seam Air Seal System just as they have since 1967. Each two or three-ply master ply is cut to length to very precise tolerance with a diagonal cut on each end. The diagonal seam in the drum shell will not separate eliminating the need to fill gaps in the bearing edge with filler putty. These plies have glue applied and are then put into the mold by hand one master play at a time. The craftsman then inserts an air bag into the mold and inflates it clamping the shell with even pressure 360 degrees around. This process creates a shell that is strong starts round and stays round for many years. 100% Maple Shell Tour Custom drum shells are 100% maple. The bass drums are 7-ply 7mm and have a warm deep tone; the toms are 6-ply 6mm with lots of warmth and resonance and have a wide tuning range. The matching wood snare drum has body yet plenty of high end and is very articulate at all dynamic levels. 60 Degree Bearing Edges All Tour Custom drums have 60-degree R2 bearing edges. This is something new for Yamaha on a maple shell drum set. This bearing edge has a rounder profile so that there is more shell to head contact. This gives the drums clarity in the low-end fundamental and added warmth. Bass Drum Spurs Sturdy yet simple in design; the bass drum spurs hold the bass drum firmly in place even under heavy playing. They are height adjustable using a drum key and there are steel spikes that can be exposed when extra hold is needed. They fold up compact for transport and are marked with angle indicators so that you can set them up the same every time. YESS Tom and Floor Tom Brackets All Tour Custom toms and floor toms use the YESS (Yamaha Enhanced Sustain System). The toms have a mount attached to the shell at the nodal point by two bolts. This system allows the drum shell to vibrate freely for maximum sustain without restricting with where the placement of the drums. The floor tom brackets are small minimal contact mounts that are located at the nodal point. They hold the legs securely in place without restricting the vibration of the shell. Ball Clamp and Triple Tom Holder Tour Custom drum sets includes the TH-945 triple tom holder with Yamahas tom ball clamp that gives you 360-degree rotation. The ball made of a super-hard resin is held in place by a single bolt making angle adjustments on the toms quick and easy. The toms lock firmly in place at virtually any angle you want. This versatile tom holder lets you mount any combination of up to three toms and/or cymbals by using either the standard or the long version of Yamahas tom ball clamp and CH model cymbal booms. Beautiful Lacquer Finishes Tour Custom drums are all finished in high-gloss lacquer. Yamaha Tour Custom Shell Pack includes: Bass Drum 22" x 17" TBD-822U Tom 10" x 8" TTT-810U Tom 12" x 9" TTT-812U Floor Tom 16" x 16" TFT-816 Snare Drum 14" x 6" TSD-0846 Tom Holder TH-945 Cymbals and hardware not included This Yamaha product can be ordered online or purchased at our shop: Gear4Music.com Red Submarine Limited Unit 2 Great North Way York Business Park York YO26 6RB 0871 309 0800

Gear 4 Music Information
Gear4music takes pride in providing quality instruments that are great value for money. From a complete professional recording setup to superb electric guitars from just £60, whether you create, perform or record Gear4music has something for you.

[ Yamaha Tour Custom 5 Piece Shell Setsb : £649.00 ]